ALTV2432220 Series
- 3 -
7. Turn main switch on the unit OFF (Figs. 1-3, pgs. 4-6).
8. Connect devices to the terminals marked [1P - 1N] through [16P - 16N] on PD16W/PD16WCB board
(Figs. 1-3, pgs. 4-6), carefully observing polarity. Terminals marked [1P - 16P] are of the same polarity.
9. Turn main switch on the unit to the ON (RESET) position (Figs. 1-3, pgs. 4-6).
10. Green LED(s) will illuminate when unit is powered.
11. Upon completion of the wiring secure enclosure door with screws (supplied).
Caution: Equipment to be installed / serviced by authorized / trained personnel only.
Shut branch circuit power before installing / servicing equipment.
WARNING: To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture.
This installation should be made by qualified service personnel and should conform to the National
Electrical Code and all local codes.
Terminal Identification:
PD16W/PD16WCB - Distribution Module
1P - 16P
AC output.
1N - 16N
AC output.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user
to the presence of an insulated DANGEROUS VOLTAGE within the product’s enclosure that may
be of sufficient magnitude to constitute an electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying
the appliance.
CAUTION: To reduce the risk of electric shock do not open
enclosure. There are no user serviceable parts inside. Refer servicing
to qualified service personnel.
Содержание ALTV2432220
Страница 7: ...ALTV2432220 Series 7 Notes...
