- 2 -
AL300ULX Series
Overview:
Altronix AL300ULX is a power supply that converts a 115VAC, 60Hz input to a 12VDC or 24VDC regulating output
(see specifications below)
.
The AL300ULX is a base power supply unit for the UL Listed multi-output power supply/charger series:
AL300ULPD4, AL300ULPD4CB, AL300ULPD8, AL300ULPD8CB, AL300ULXPD16, AL300ULXPD16CB
(Refer to AL300ULX Series Power Supply Configuration Reference Chart below)
.
*Access Control Performance Levels:
Destructive Attack - I; Endurance - IV; Line Security - I; Stand-by Power - IV.
AL300ULPD4(CB) and AL300ULPD8(CB) are available in larger enclosure.
Add “X” to the model number (e.g. AL300ULXPD4/CB).
Specifications:
AL300ULX Series Power Supply Configuration Reference Chart:
Altronix
Model Number
Accessory Power Distribution Module(s)
Number of Outputs
Fused Outputs
PTC Outputs (auto-resettable)
Total Output Current (A)
Output Rating (A) per Output
Power Supply Input Fuse Rating
Power Supply Output Fuse Rating
Agency
Listings
UL Listings and
File Numbers
AL300ULX
AL300ULXX
AL300ULXR
–
1
–
–
2.5
2.5
5A/
250V
15A/
32V
UL File # S4707
UL 294*
UL Listed for Access
Control
System Units.
––––––––
UL 603
UL Listed for Power Supplies
for Use with Burglar-Alarms
Systems.
––––––––
UL 1069
UL Listed Hospital Signaling
and Nurse Call Equipment.
––––––––
UL 1481
UL Listed for Power Supplies
for Fire Protective Signaling
Systems
––––––––
“Signal Equipment”
Evaluated to
CSA Standard C22.2
No.205-M1983
AL300ULPD4
PD4UL
4
P
–
2.5
3.5
5A/
250V
15A/
32V
AL300ULPD4CB
PD4ULCB
–
P
2.5
AL300ULPD8
PD8UL
8
P
–
2.5
3.5
5A/
250V
15A/
32V
AL300ULPD8CB
PD8ULCB
–
P
2.5
AL300ULXPD16
Two (2)
PD8UL
16
P
–
2.5
3.5
5A/
250V
15A/
32V
AL300ULXPD16CB
Two (2)
PD8ULCB
–
P
2.5
Altronix Corp.
140 58th St. Brooklyn, NY
California
State Fire
Marshal
NYC
Dept. of
Buildings
Input:
• Input 115VAC, 60Hz, 3.5A.
Output:
• Class 2 Rated power-limited output(s).
• 12VDC or 24VDC selectable output(s).
Burglar Alarm Aplications (UL 603):
12VDC = 10VDC-13.2VDC.
24VDC = 20VDC-26.4VDC.
• 2.5A total supply current.
• Filtered and electronically regulated output(s).
• Short circuit and thermal overload protection.
Supervision:
• AC fail supervision (form “C” contacts).
• Low battery and battery presence supervision
(form “C” contacts).
Battery Backup:
• Built-in charger for sealed lead acid or
gel type batteries.
• Automatic switch over to stand-by battery
when AC fails.
• Maximum charge current 0.7A.
• Zero voltage drop when switched over to
battery backup.
LED Indicators:
• AC input, DC output and Battery LED indicators.
Additional Features:
• Power supply, enclosure, cam lock and battery leads.
• All models are available in red enclosure
(add an “R” suffix to the part #, e.g. AL300ULPD8R).
