Altronic VariSpark CPU-XL, Руководство по эксплуатации

Страница: 25 / 97

CPU-XL VariSpark IOM 07-21
All rights reserved © ALTRONIC, LLC 2021
25
24.7 The next setup screen permits the operator to enter an ignition Test Mode. This
test mode can fire all outputs in rotation, or individual outputs at a slow rate. This
feature can be used to troubleshoot primary wiring and Output Module operation.
Test Mode will terminate if rotation of the engine is sensed. Diagnostic features do
not function while in Test Mode.
AT
PRESS FOR PRESS PRESS TO
TEST MODE FOR NEXT EXIT
OPTION
ENTER
NEXT ESC
THEN
BEFORE
STARTING
TEST MODE
PRESS TO PRESS TO
VERIFY EXIT
PURGED
ENTER
NEXT
Then the Test Mode screen indicates that the ignition is firing and permits the
operator to select the output to be fired.
AT
PRESS TO PRESS TO PRESS TO
SELECT SELECT EXIT
PREVIOUS THE NEXT
OUTPUT OUTPUT
ESC
Test Mode selection is described below:
ALL - Rotate through all cylinders in the fire order
1-N -Fire individual cylinder; the cylinder’s label and connection will be
displayed. If the firing is detected at a different location or not detected at all,
an asterisk ‘*’ will be displayed next to the location.
NOTE: The Test Mode is enabled by
the user during initial setup of Logic/
Display Module from PC terminal
program. See form CPU-XL VariSpark
PI for details.
WARNING: The operator MUST fully
purge the engine of combustible mix-
tures prior to selecting the test mode
operation. Pressing the enter key again
is a confirmation of this action.
⬆
⬇