Altronic VariSpark CPU-XL, Руководство по эксплуатации, Страница: 20 / 97

CPU-XL VariSpark IOM 07-21
All rights reserved © ALTRONIC, LLC 2021
20
22.0 ADJUSTING INDIVIDUAL OFFSETS
22.1 The timing of individual cylinders can be offset by up to 3 degrees of advance or
retard from the global timing of the engine. The values are not saved in EEPROM
memory. See section 23.2.
22.2 Enter the individual timing adjustment menu as described below.
FROM PRESS
TIMING
THEN AT PRESS
THEN AT PRESS
22.3 The individual timing adjustment screen identifies the primary output to be
adjusted, and the degrees of offset in use for the output.
THEN AT NOTE: 0.0 degrees
advance for
output A.
TO ADJUST TO SELECT TO SELECT
INDIVIDUAL CYL NEXT PREVIOUS
TIMING CYLINDER CYLINDER
OFFSET
NEXT
SETUP
TO VIEW TO GO TO TO GO TO TO
CURRENT CYLINDER DIAGNOSTIC RETURN
CYLINDER SELECT OFFSET TO HOME
GRAPH
F1 F4
SCREEN
ESC
IADVANCE TO THE TO RESET THE
NEXT CYLINDER CYLINDER TIMING
IN THE FIRING ORDER TO EEPROM
TIMING
STORED VALUE
RESET
⬇
⬆
NOTE: In applications with narrow
firing angles, the adjustment range
may be limited.
NOTE: Cylinder identification infor-
mation describes:
1L = Cylinder Label
01 = Firing Order
1A = Rail/Coil Position.
⬆
⬇
F3