44
MOSTOSTAL Plus FRAME SCAFFOLDINGS Assembly Manual
11
9
NON-STANDARD SCAFFOLDING SET-UPS
RAW MATERIALS USED FOR
COMPONENT MANUFACTURE
PRODUCT MARKING SYSTEM
You have to perform the structural analyses for the non-standard scaffolding set-ups. The assumptions and data
used for the analyses are presented in the separate document and available upon the request of the parties intere-
sted in this information.
All information concerning the shape and parameters of the raw materials used to manufacture the scaffolding
configuration components are specified in the figures of the scaffolding components and can be obtained from the
scaffolding manufacturer. The basic material for the primary scaffolding components is S235JRG2 steel with the
higher yield stress of Re ≥ 320 MPa (for the frame structure components) or Re ≥ 280 MPa (for the platforms), and
for the secondary components – steel of Re ≥ 235 MPa.
All products manufactured by ALTRAD-MOSTOSTAL according to the existing ISO 9001 quality system are marked
with the permanent marks (stamp ~ 0,7 mm deep) located as specified in the technical documentation. Additionally,
the manufacturer and/or customer labels are used acc. to the individual agreements.
A 75 RRM – general mark view
A 75 – permanent mark of the manufacturer – ALTRAD-MOSTOSTAL in Siedlce
M – letter of the month of manufacture (variable mark)
RR – digit of the year of manufacture (variable mark)
Additionally, it is possible to mark the products with the approval number appropriate for the individual domestic
markets, e.g. Ü 190, Ü 846, Ü 887. Additional marking is placed at the end of the basic mark. The mark location is
specified in the product design drawings.
Year symbol RR
Month symbol M
01 = 1995
20 = 2014
A – January
G – July
.....................
21 = 2015
B – February
H – August
16 = 2010
22 = 2016
C – March
I – September
17 = 2011
23 = 2017
D – April
J – October
18 = 2012
................
E – May
K – November
19 = 2013
95 = 2089
F – June
L – December
10
