Altrad MOSTOSTAL E823800, Инструкция по эксплуатации

Страница: 6 / 14

5
BUILDING EDGE PROTECTION SYSTEM Instruction for use
DESCRIPTION OF COMPONENTS
2
Versatile railing post
Index
ZZA023
This component is made of the steel pipe Ø48,3 mm with a
wall 2,6 mm thick. The pipe tolerance is compliant with PN-EN
10219. The location and mounting parts are provided along the
pipe height to install the main and intermediate railing. The post
bottom is finished with a plate 10 mm thick with a hole Ø13 to
mount the anchor. The swivel railing and toeboard fixing parts
installed on the post allow for smooth installation of the pro-
tective railing around the post vertical axis. Owing to that it is
possible to install the railings on the complex ceiling edges.
Main and intermediate railing
Index
ZZA024
Made of the steel pipe Ø 33,7 x 2,6, 3,0 m long. The pipe toler-
ance is compliant with PN-EN10219. The railing pipes are galva-
nized and finished with red shrink jackets over 200 mm. They
indicate the railing zone that should protrude beyond the posts.
Toeboard
Index
-
As regards this system it is a wooden plank 150 mm high and
min. 25 mm thick, and 3,0 m long. The toeboards should be
made of the S10 class coniferous timber according to DIN
4074-1 (C25 according to EN338). The toeboard must always
be 200 + 200 mm longer than the railing spacing. The toeboard
may be painted providing that the paint does not make the visu-
al control of the timber condition difficult. It is acceptable to use
the sawn timber that meets these requirements.
Storage palette
Index
ZZA022
Used to transport and store the railings. The palette can also be
used to store the toeboards 3,0 m long. It is made of the steel
sections 60 x 60 x 3 and galvanized. The palette is equipped with
the transportation belt. Overall dimensions: 1200 x 800 x 825.