Altrad MOSTOSTAL E823800, Инструкция по эксплуатации

Страница: 5 / 14

4
BUILDING EDGE PROTECTION SYSTEM Instruction for use
GENERAL
1
The presented building edge protection system belongs to the “A” class. An “A” class system transfers static loads
only. Should the dynamic loads be presents you cannot use the system shown in these instructions. When the working
surface that is protected with the system is inclined by more than 15° the use of the system shown in the instructions
is prohibited.
The temporary safety protection system belongs to the general protection systems which are required and used
during the construction works.
The system presented meets all legal requirements concerning the equipment, location and strength in force in Poland
as well as the requirements specified in PN-EN 13374 in terms of the “A” protection class.
end rod
≥1,1 m
mounting rod
end rod
pipe Ø33,7 x 2,6
pipe Ø48,3 x 2,6
toeboard H>150 mm
ceiling board edge
anchoring bolt
mounting rod