Altrad E-PowerBarrow Heavy Duty FS, Руководство по безопасности и эксплуатации

Страница: 13 / 27

ALTRAD FORT E-Powerbarrow : Heavy Duty UV, FS, GL, Heavy Duty pro UV, pro FS, pro GL - Safety & Operating Instructions
13
1
. English - Specifications
1.1 Specifications E-PowerBarrow
 Max. speed Heavy Duty series: 5 km/h (+/-10%
depending on the mounted tire)
 Max. speed Heavy Duty pro series: 5.7 km/h (+/-
10% depending on the mounted tire)
 Max. load: 150 kg
 Motor: Carbon brush motor 430 W
 Structure: ø 30 x 1.5 mm
 Surface coating: electrolytic galvanizing
 Dimensions: 147 cm x 64 cm x 64 cm (l x w x h)
 Tire: 4.80/4.00-8 (
∮
400 mm).4.10/3.50-4
 Battery Heavy Duty: 24V/10Ah AGM lead acid
 Battery Heavy Duty Pro: 29V/12Ah Lithium Ion
 Overload protection: Yes, heat sensor
 Charger: 240VAC / 47-63Hz DC24V / 2.5Ah
 Max. slope: 30 degrees
 Weight: 22 kg without battery
 Mounted tray:
UV-series: 100 l, 1.2 mm galvanized steel
FS-series: 160 l, 7.0 mm HDPE plastics, green
GL-series: 100 l, 6.5 mm HDPE plastics, yellow
1.2 Operating Conditions
 Working temperature: between -10
o
and 40
o
 Altitude: up to 2000 m
 Relative humidity: between 30% and 95%
1.3 Description
The E-PowerBarrow is composed of a frame with an
electric powered hub motor, a battery and a tray. The
battery is under the wheelbarrow and can be removed. At
the right lever is the panel for controlling the E-
PowerBarrow
1.4 Identification
An E-PowerBarrow can be identified by a unique serial
number on the hub motor.
2. Warnings
2.1 Warning signs on the wheelbarrow
General warning that shows the location of the
electric system of the E-PowerBarrow.
2.2 General warning
WHEN USING THE E-POWERBARROW THERE IS A RISK OF
PERSONAL INJURIES OR DAMAGE TO PROPERTY.
THEREFORE READ THIS MANUAL BEFORE YOU OPERATE
THE E-POWERBARROW. IF THE MANUAL FOR WHATEVER
REASON CAN’T BE READ PLEASE ASK YOUR SUPPLIER
FOR A NEW MANUAL. STORE THE MANUAL IN A DRY
PLACE.
WHEN USING THE E-POWERBARROW UP OR DOWN A
SLOPE DO NOT LOAD THE WHEELBARROW WITH MORE
THEN 75KG.
ALWAYS MOUNT THE OPTIONAL SUPPORTING WHEELS
WHEN LOADING THE WHEELBARROW OVER 75Kg TO
PREVENT PERSONAL INJURIES.

Do not use the E-PowerBarrow for the transport of
persons.

Do not drive the E-PowerBarrow electric hub wheel
under water or mud.

Do not clean the E-PowerBarrow with high-pressure
water (Power washer).

Do not overload the E-PowerBarrow.

Do not use the E-PowerBarrow on steeper surfaces
than mentioned in the specifications.

Do not use the E-PowerBarrow when there is a
malfunction.

Do not use the E-PowerBarrow when the tire pressure
is below 1.5 bar.