Alton VICTORIAN CHELTENHAM, Инструкция по эксплуатации

Страница: 23 / 28

23
9
You will need two sets of step ladders at
this point and a helper. Slot the ridge
bar onto the tenons of the roof corner
bars at both ends of the ridge. The
central glazing bar on the front gable
should locate with the ridge bar below
the joint with the roof bars (diagram
36). Once in place still with your helper
securing one end drill the roof corner
glazing bars as shown in diagram 33 to
36. The pilot holes should be drilled
horizontally and off centre as shown so
that the screw on the one side misses
the other. If you always drill the holes
for the roof bars 18mm from the left
hand side of the bar this will prevent
any interference problems. Fix the roof
bars with 80mm screws (diagram 36).
Roof Assembly
Dia. 33
Dia. 32
Diagram 32
EV
04
87
EV
04
87
Standar
d Ridge Bar
External