32
Glazing
The capping for the roof corners is wider than normal to cover the join of the cover strip to the roof
corner glazing bar. The capping should also be fitted flush with the bottom edge of the glass at the
eaves.
Note:
Use the 19mm countersunk screws where a vent is to be used so the head of the screw doesn’t
prevent the vent from closing properly.
If you haven’t already done so you can now install the louvre glass in the sides.
610
X
1520
Capping flush with
the end of the glass.
EV
00
54
EV
00
54
EV
01
50
EV
02
50
M
The corner capping
should overlap onto
the cloaking strip to
seal the joint between
the cloaking strip and
the roof corner bar.
Cedar capping option
Aluminium capping option
Insert Glazing rubber
9
