28
9
Glazing
Glaze the remaining side sections as before.
When you come to the front end glaze this as
you did the rear end.
Once all the roof corner cloaking strips have
been installed run a bead of silicone all the way
down the joint between itself and the roof
corner bars (diagram 31).
Dia. 31
Next you need to decide on the location
of your roof vents. These can NOT be
fitted side by side. Once you have
decided this start by installing the glass
that goes underneath the vent. Use 2
of the glass stops per pane (it is best to
locate these over the screw heads in the
eaves spacers) see diagram 30.
EV
00
55
EV
00
54
Silicone bead
External
Diagram 31
Eaves Bar
External
