Alton Evolution Eight Series, Инструкция по эксплуатации

Страница: 36 / 52

36
Door Installation
10
EV0292M
EV0291M
EV0110
Diagram 41
External
EV0110
EV0291M
Diagram 40
External
EV0110
EV0110
Diagram 39
Internal
Now offer up the staple (EV0292M) to the
door and close the door until it locates
correctly with the hasp. Holding the staple in
this position open the door again and fix with
two 15mm screws (diagram 41).
Standing on the inside of the greenhouse, with
the door in the closed position you can install
the door frame sides (diagram 39). Secure
these with four 40mm screws per side. These
should be fitted as close to the door as
possible while still allowing it to pass by freely.
Once the door frame sides
are installed you can fit the
hasp and staple. First of all
fit the hasp (EV0291M) to the
right hand door frame side
(diagram 40). Choose a
position that best suites your
reach, keep it clear of the
handle fixings as this may
prevent it from closing
correctly. Fix this with two
25mm screws.