7
Side Assembly
The positioning of the side panels is
entirely flexible and can be decided as you
fit them, so for example if you want an
opening window in the rear corner of the
building you can. This instruction manual
will show the standard layout.
Take the first panel and position it at the
rear of the building, get a helper to hold
this in place while you position the next
panel (diagram 3).
Diagram 3
ABA0027
4
Diagram 4
Dia. 5
Diagram 5
Drill pilot holes with the 4mm drill bit
supplied at each point shown by the
arrows on diagram 4. Make sure the
panels line up perfectly on the inside
before fixing with 60mm passivated
screws (diagram 5).
Do
NOT
fix the side panels to the floor
yet as this will make construction hard
later in the build.
ABA0025
ABA0025
ABA0
027
