background image

ALT I076 Issue 03/0418

Page  29  

7. Warranty

Microwash Q-Rinse 

Automated Instrument Rinsing system 

Warranty and disclaimers

Altomed warrants that the Microwash Q-Rinse system when delivered will conform to 

the manufacturer’s then current version of the published specifications for such. The 

Microwash Q-Rinse system in all material respects shall be free from defects in material and 

workmanship for a period of one (1) year from date of delivery when properly installed, 

maintained, and used for the intended purpose. Disposable accessories such as tubing, 

sleeves and brushes are not covered by this Warranty. An extended warranty is available to 

purchase at a premium for UK customers only.

The exclusive remedy for any breach of this warranty shall be, at Altomed’s sole option, the 

repair and replacement of the non-conforming Microwash Q-Rinse system or component 

thereof, which is returned to Altomed during the warranty period. Any claim based upon 

this warranty must be submitted to Altomed during the applicable Warranty period. All 

replacement components provided during the warranty period shall be deemed to have 

been delivered on the original delivery date of the Microwash Q-Rinse system.

This Warranty is non-transferable without Altomed’s prior consent.

Any Microwash Q-Rinse system or component thereof returned for any reason must 

be accompanied by an authorization number obtained by calling the Altomed Quality 

Department on 0191 519 0111. Any shipping charges incurred shall be paid by the purchaser/

user of the equipment.

This warranty does not apply to normal wear and tear, or to defects, malfunctions or failures 

that result from the abuse, neglect, improper installation or maintenance or processing, 

alteration, modification, accident, or misuse of the Microwash Q-Rinse system or its 

components. Failure to maintain the Microwash Q-Rinse system and its components in 

accordance with the manufacturer’s recommendations shall void the warranty.
THIS WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES, EXPRESS OR 

IMPLIED, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR 

FITNESS FOR A PARTICULAR PURPOSE. ALTOMED SHALL NOT BE RESPONSIBLE FOR 

ANY LOST PROFITS OR OTHER DIRECT, INCIDENTAL, CONSEQUENTIAL OR EXPLANARY 

DAMAGES SUFFERED BY ANY PARTY, EVEN IF IT HAS BEEN ADVISED OF THE POSSIBILITY 

OF SUCH DAMAGES.

In no event shall Altomed’s liability for any claim, whether in contract or tort, exceed the 

amount paid to Altomed for the Microwash Q-Rinse system. The Warranty set forth herein 

may not be enlarged, or otherwise modified by any Altomed agent or employee, and 

Altomed does not assume any liability or make any warranty except as stated herein.

Содержание Microwash Q-Rinse









































Отзывы: