Alto Aqua Leader Contempra, Общее руководство по инструкции

Страница: 26 / 33

06
SECTION
GENERAL INSTRUCTIONS - OVAL POOLS
ASSEMBLING
THE POOL FRAME
9a.
Install upright bracket _ Round section
Lay the uprights on the floor and position and place the top
bracket on the top of the upright. Make sure the bracket is in
the correct position. The holes of the bracket must align with
the holes on the top of the front face of the upright. Insert two
screws in the center holes of the bracket to fix it.
Position and place the middle bracket on the center of the up-
right. The holes of the bracket must align with the holes of the
frontal face of the upright. Insert two hexagonal screws in the
center holes of the bracket to fix it. (image 6.3)
6.3
4x
IMPORTANT NOTE:
If you have a 15’ or a 18’ feet pool YOU HAVE TO PLACE
THIS SPACER between the upright and the upright bracket.
For other pool sizes YOU MUST NOT INSTALL THIS
PLASTIC SHIM.
TOP
BOTTOM
49
Lay the uprights on the floor and position and place the top
bracket on the top of the upright. Make sure the bracket is in
the correct position. The holes of the bracket must align with
the holes on the top of the front face of the upright. Insert two
screws in the center holes of the bracket to fix it.
Position and place the middle bracket on the center of the up-
right. The holes of the bracket must align with the holes of the
frontal face of the upright. Insert two hexagonal screws in the
center holes of the bracket to fix it. (image 6.4)
6.4
4x
TOP
BOTTOM
06
SECTION
GENERAL INSTRUCTIONS - OVAL POOLS
ASSEMBLING
THE POOL FRAME
50
9b.
Install upright bracket _ Straight section
G
G
I
E
E
F
F