Alto Aqua Leader Contempra, Общее руководство по инструкции

Страница: 10 / 33

17
02
SECTION
GENERAL INSTRUCTIONS - OVAL POOLS
GROUND
PREPARATION
Example on how to mark out pool area for an 18 x 33
Please be sure to use your pool’s footprint for your pool size on page 57.
EXAMPLE
02
SECTION
GENERAL INSTRUCTIONS - OVAL POOLS
GROUND
PREPARATION
18
3
. Make the area flat and level
a) Remove all the high spots with a shovel, hoe or rake. To make
sure your pool is stable, compact the ground well before adding
the sand. Be prepared to hire earth moving equipment if you
need to level a large area. Remember, your pool must be level
across the diameter of the pool.
(Image 2.11)
b) Small dips and hollows may be filled in, but the soil must be
hard-packed with a tamping tool or a soil compactor.
c) Take material such as rock dust or fine mortar that can con -
form a solid, permanent base and deposit this material around
the rim of the basin.
(Image 2.12)
d) The material used should be spread around the perimeter of
the pool to a width of 24” (60cm) and a thickness of 2” (5cm).
(Image 2.13)
e) Recheck the outer perimeter of the oval shape, where the pool
wall will be placed. Compact the ground and make sure there are
no high or low spots. The bottom edge of the pool wall must rest
flat on the ground and have no gaps under it.
Your pool must be perfectly level. Take the time you need to
be sure your foundation is perfecty level.
IMPORTANT NOTE:
2.11
2.12
2.13
Level
396 (33 FT.)
42
16 27
15
52
136
219
218
(18 FT. 2 IN.)
Strap
57 1 4
(12 Places)
252
252
223
R108
57.2375
57.2375
57.2375
57.2375
57.2375
57.2375
57.2375
57.2375
57.2375
57.2375
57.2375
57.2375