b. Analog levels
c. Led and Illuminated Power Switch
3.2 Analog Connections (Back Panel)
a. Analog Inputs/Outputs
b. Effects Bypass Pedal Input
7
a. Program and Variations Selections
- Program Select Knob:
The Program Select Knob is used to choose the program
you wish to perform.
- Variations Select Knob:
Each program on this apparatus has one parameter
which can be adjusted. Depending on the type of program selected, this knob
might alter reverb decay, chorus depth, etc.
- Analog Input Level Potentiometer:
The input level control sets the main input
Gain, before the signal reaches the input bus. It controls both the Left (Mono)
and Right input levels simultaneously.
- Analog Output Level Potentiometer:
The output level control sets the level
of the output signal going to the amplifier or mixer from
Verb.
- Dry/Wet Mix Potentiometer:
Adjusts the balance between the dry signal coming
into the input and the effects generated by
Verb.
- Digital Saturation LED:
Displays the signal level coming into the input during
Normal operation, if the signal level is too high, this LED light and you will begin
to hear the signal distortion.
- Power On/Off Switch:
Turns the apparatus on and off.
- Inputs:
These are 1/4" unbalanced phone jacks which connect to sources such
as the effects sends of mixing console. They may be used with nominal input
level up to 9dBu.
For mono application, use the Left / Mono input. The Left / Mono input jack is
normal to the Right jack. This means that when nothing is plugged into the Right
input jack, the signal present at the Left / Mono input is routed to the Right as
well.
- Outputs:
These are 1/4" unbalanced phone jacks which connect to devices
such as the effects returns on a mixing console or power amplifier inputs.
- Effects Bypass:
This is a 1/4" phone jack which connects to a footswitch (with
latching), either normally-open or normally-closed. When the footswitch is in
the state of "OFF", the function will be "Effects"; On the other hand, when the
footswitch is in the state of "ON", the effect will be disabled.
BYPASS
OUTPUT
INPUT
LEFT
RIGHT
LEFT(MONO)
RIGHT
9 VAC
POWER
~
A102