CTP Combitherm
20
•
MN-35948
•
Rev 16
•
10/18
•
Combitherm® CT PROformance™ Series Operator’s Manual
Full oven update:
IB, CB, and OB
Update the CB
(control board) only
Update the OB
(option board) only
Update the IB
(interface board) only
Return to
previous screen
Soft ware Upload Screen
NOTICE:
Aft er the soft ware update has
been completed, the oven may
automatically initiate a shut down
and reboot sequence if required.
Press the ON button to power the oven on .
Touch the utilities icon .
Touch the download icon .
Touch the download new soft ware icon .
Most soft ware updates will require the full oven update
as shown below. Additional options are available in the
event a special need arises. Call our Service Department
for assistance with these special circumstances.
Remove the cover of the USB port on the oven.
Insert the USB stick. If the USB stick is not recognized
by the Combitherm, a question mark will appear on
screen. Try again with another fl ash drive device or call
Alto-Shaam Service.
When the data has made a
successful transfer to the USB
drive, the screen will change.
Touch the green check mark
icon to complete the process.
Remove the USB stick and
replace the cover on the USB
port on the oven.
Soft ware Updates
The PROtouch controller plays an important part in our continuous improvement process. New features and abilities
can be loaded to your oven as they become available. Soft ware for your oven can be accessed from the Alto-Shaam
website, under the Resource Library Tab, then Soft ware Center.
http://www.alto-shaam.com/en/soft ware-download-center
Use a USB stick to copy the PROtouch soft ware from the website to the USB stick.
Software Updates