CT ExpRESS
INSTALLATION MANUAL •
15 .
i n s t a l l a t i o n
o p t i o n a l h a n d h e l d s p r a y h o s e
Valve bracket
installation
1
using the valve bracket as a template for placement, and a #28
drill bit (0.14" diameter), drill two holes at the lower rear side
of the unit (same side as door opening). Fasten the valve bracket
using the 2 self drilling screws.
2
using the sprayer hanger as a template for placement, and a #28
drill bit (0.14" diameter), drill three holes at the upper front side of
unit (same side as door opening). Fasten the sprayer hanger using the 3
self drilling screws.
3
connect the sprayer hose to the valve and place the sprayer in the hanger.
4
continue to connect an incoming water supply line to the valve.
Sprayer hanger
Sprayer hose
Valve
