CT ExpRESS
INSTALLATION MANUAL •
8 .
water requirements
water quality minimum standards
ONE (1) COLD WATER INLETS - DRINKING QUALITY
ONE (1) WATER INLET: 3/4" g*
LINE PRESSURE: 30 to 90 psi
2.8 to 6.2 bar
WATER DRAIN:
1-1/2" connecTion wiTh a 2" MiniMuM air gap
insTalled as close To The oVen as possiBle
using a waTer supply noT MeeTing alTo-shaaM’s MiniMuM
waTer QualiTy sTandards will Void This warranTy.
it is the responsibility of the purchaser to ensure that incoming water supply is
compliant with the specifi cations listed through adequate treatment measures.
installation of the combiguard
TM
water Filtration system is recommended, but
this system may not address all water quality issues present.
clearance requirements
Contaminant
Free chlorine
hardness
chloride
ph
alkalinity
silica
Total dissolved solids (tds)
Inlet Water Requirements (
untreated water
)
less than 0.1 ppm (mg/l)
less than 3 gpg (52 ppm)
less than 30 ppm (mg/l)
7.0 to 8.5
less than 50 ppm (mg/l)
less than 12 ppm (mg/l)
less than 60 ppm
LEFT: 4" (152mm)
RECOMMENDED SERVICE access: 18" (457mm)
20" (508mm)
FROM HEAT PRODUCING EQUIPMENT
RIGHT: 4" (102mm) TOP: 20" (508mm)
For air MoVeMenT
BACK: 4" (102mm) BOTTOM: 4" (102mm)
For air MoVeMenT
* an additional water supply
is required for the optional
hand held spray hose.
dimensions:
h x w x d
EXTERIOR:
33-1/2" x 20-7/16" x 35-3/4" (850mm x 517mm x 906mm)
EXTERIOR WITH OPTIONAL HAND SPRAYER:
33-1/2" x 23-7/16" x 35-3/4" (850mm x 593mm x 906mm)
4•10
es
i
installation requirements
•
oven must be installed level.
• Hood installation is required.
•
Water supply shut off valve and back flow preventer when
required by local code.
weight
capacity
neT
180 lbs (82 kg)
Full-siZe pans: 20" x 12" x 2-1/2"
Four (4)
ship
310 lbs (141 kg)
gn 1/1: 530 x 325 x 65mm
Four (4)
craTe diMensions: (l x w x h)
37" x 42" x 45"
(940mm x 1067mm x 1143mm)
halF-siZe sheeT pans:
18" x 13" x 1"
eight (8)
gn 1/2: 265 x 325 x 65mm
eight (8)
48 lb (22 kg) MaXiMuM
VoluMe MaXiMuM: 30 quarts (38 liters)
electrical
(DEDICATED CIRCUIT REQUIRED)
Model
VolTage ph
hZ
aMps
kw
awg
cord & plug
4•10
ES
i
208
1
60
22.5
4.68
—
NEMA L6-30P - US
ONLY
208 – 240
3
60
15.0 – 18.0
5.4 – 7.48
10
NO
CORD
OR
PLUG
380 – 415
3
50/60
9.0 – 10.0
6.0 – 7.18
10
NO
CORD
OR
PLUG
2
"
(50mm)
4-5/16
"
(109mm)
7-1/4
"
(182mm)
10-15/16
"
(278mm)
16-15/16
"
(430mm)
EXHAUST VENT
A=WATER INLET
B=DRAIN
C=ELECTRICAL
Cord Length
120V - 8 ft. (2438mm)
35-3/4
"
(906mm)
35-3/4
"
(906mm)
20-13/16
"
(527mm)
39-1/2
"
(1003mm)
20-7/16
"
(517mm)
17-7/16
"
(442mm)
23-7/16
"
(593mm)
33-1/2
"
(850mm)
27-1/2
"
(697mm)
4
"
(102mm)
52-3/16
"
(1325mm)
A
B
C
RH DOOR
LH DOOR
