Altman Spectra-Strip Series, Инструкция по установке и эксплуатации

Страница: 3 / 12

I N S T A L L A T I O N A N D I N S T R U C T I O N M A N U A L
3
Spectra-Strip™ LED Series
Solid State Lighting Fixture
DESCRIPTION
The Spectra Strip LED lighting fixture is a portable unit with a flexible power supply cord. The overall
construction of the fixture includes corrosion protected aluminum housing. The fixture is supplied with a
state of the art microprocessor-controlled solid-state LED light engine incorporating 3-watt Luxeon Rebel
Red, Green, Blue, and Amber color and/or White 3000°K LEDs, and an on-board power supply. The LED
substrate is coupled to a highly efficient heat sink and cooling system for prolonged life of the LEDs. The
fixture can be ceiling mounted to a pipe or floor mounted. All components and electrical devices are ETL
Listed or Recognized. A safety cable is provided for use when
securing
the fixture to a pipe.
PACKING LIST
The Spectra Strip LED lighting fixture is shipped with the following:
Spectra Strip with 2 Safety Cables.
PowerCON® Power Supply Cord with Edison power plug.
1 Safety filter frame for each LED compartment.
Installation and Instruction Manual.
WARNING:
ALL ELECTRICAL WIRING AND CONNECTIONS SHOULD BE PERFORMED BY A QUALIFIED
ELECTRICIAN
SETUP AND INSTALLATION
Unpacking
Remove the Spectra Strip lighting fixture from its shipping box. Set the unit down on a flat surface before
proceeding. The Spectra Strip is shipped fully assembled and ready for use.
Lamping and Re-lamping
The Spectra Strip lighting fixture is provided with an integral LED light engine. Under normal operating
conditions, the LED light engine should have a rated life expectancy of over 50,000 hours. There are no user
serviceable parts inside. The entire LED assembly will need to be changed.