VP500-103 USB Media Player
User’s Guide
400-0625-001
- 8 -
7. Operation
After power up, the VP500-103 continuously loops on the default track until a new track is selected using the handheld remote control.*
The default track loops seamlessly from the end to the beginning without any artifacts in between. If the USB memory is removed, or if
any error in operation occurs, the VP500-103 automatically defaults to a low impact idle image that gently reminds the user to insert a
USB drive by displaying a simple icon.
Figure 4
: Low impact screen image when USB memory is removed
*A small plastic tab extends out from the remote control battery compartment. This must be removed before using the remote control.
7.1 Default Track Selection
Use the skip chapter buttons on the remote control provided with the VP500-103 to change the default track. You do not need to know
the track number. Simply stop when the track you want displayed is visible on the display. The corresponding track number has already
been stored in memory and will play automatically even after a power reset.
Figure 5
: Press skip chapter button to change track
7.2 Advanced Options
Advanced options may be set using the remote control. Any changes to the configuration are stored in memory and will remain even
after a power reset occurs.
Access the advanced options by pressing the “Setup” button on the remote control. Use the arrow (orange), Enter (green), and Return
(yellow) buttons to navigate the menus. Advanced options include output resolution, video format, and language options.
Note: Use caution when changing resolutions or video format. If your display does not support the new format, you will not be able to
read the menu and make changes.
