DISTRIBUTION AMPLIFIERS
5
APPLICATION DIAGRAM
5
INSTALLING YOUR DISTRIBUTION
AMPLIFIER
6
Step 1
. Connect one end of the input cable
included with the unit to the video output
port of your source computer and the 15-
pin HD connector end to the video input
port of the
DA1804NT
.
Step 2
. Connect the input cable to the unit. Plug it
into the power outlet. The power indicator
LED on the front panel will light. This
indicates that the unit is operational.
Step 3.
Connect cable from the video source
(VCR, Document Camera, etc.) to the
input connector of the
DA1804NT
.
Connect the output connector of
DA1804NT
to the display devices
(monitors or projectors) through the coaxial
cables.
Step 4.
If the image is less than perfect check all
of the connections. The unit is very reliable
and seldom will this be the cause of
malfunction. Poor quality cables may often
degrade the performance of the product.
Make sure that the cables used
are coaxial cables and that all pins are in
good condition.
CONGRATULATIONS! YOU ARE DONE.
OPERATION
7
The
DA1804NT
will operate successfully as long as
cables are attached properly and other technical
specifications are followed.
If you experience any problems, please call
1-800-258-4623 or 1-714-990-2300 for
international calls.
