manualshive.com logo in svg

Altherma EKHBH016AA, Руководство по установке, Страница: 4 / 32

Поделиться
Скачать
Altherma EKHBH016AA Скачать руководство пользователя страница 4

Installation manual

1

EKHBH/ EKSWW150-300V3/Z2

Indoor unit for air to water heat pump and sanitary warm water tank for air to water heat pump system

4PW36978-1C

C

ONTENTS

Page

Introduction ....................................................................................... 1

General information.................................................................................... 1
Scope of this manual.................................................................................. 2
Model identification .................................................................................... 2

Accessories....................................................................................... 2

Accessories supplied with the indoor unit .................................................. 2
Accessories supplied with the sanitary water tank (optional)..................... 2

Typical application examples............................................................. 3

Application 1 .............................................................................................. 3
Application 2 .............................................................................................. 3
Application 3 .............................................................................................. 4
Application 4 .............................................................................................. 4

Overview of the indoor unit ............................................................... 5

Opening the indoor unit.............................................................................. 5
Main components....................................................................................... 6
Switch box main components .................................................................... 7
Functional diagram..................................................................................... 7

Installation of the indoor unit ............................................................. 8

Selecting an installation location ................................................................ 8
Dimensions and service space .................................................................. 8
Inspecting, handling and unpacking the unit .............................................. 8
Mounting the indoor unit ............................................................................ 9
Installation of the EKHBDP drain pan kit (only for EKHBX models)........... 9
Refrigerant pipework .................................................................................. 9
Water pipework .......................................................................................... 9
Charging water......................................................................................... 11
Piping insulation ....................................................................................... 11
Field wiring ............................................................................................... 11

Sanitary water tank (optional) ......................................................... 14

Main components..................................................................................... 14
Outlook diagram....................................................................................... 15
Installation guidelines............................................................................... 15
Installing the sanitary water tank.............................................................. 15
Connecting the water circuits ................................................................... 15
Field wiring ............................................................................................... 15

Start-up and configuration............................................................... 17

DIP switch settings overview.................................................................... 17
Room thermostat installation configuration .............................................. 17
Pump operation configuration .................................................................. 17
Sanitary water tank installation configuration........................................... 18
Initial start-up at low outdoor ambient temperatures ................................ 18
Pre-operation checks ............................................................................... 18
Powering up the indoor unit...................................................................... 18
Setting the pump speed ........................................................................... 19
Field settings ............................................................................................ 19

Test run and final check .................................................................. 24

Automatic test run .................................................................................... 24
Test run operation (manual) ..................................................................... 24
Final check ............................................................................................... 24

Maintenance ................................................................................... 25

Troubleshooting............................................................................... 25

General guidelines ................................................................................... 25
General symptoms ................................................................................... 25
Error codes .............................................................................................. 26

Technical specifications .................................................................. 28

General .................................................................................................... 28
Electrical specifications ............................................................................ 28
Sanitary water tank specifications (optional)............................................ 28

I

NTRODUCTION

General information

Thank you for purchasing this 

 indoor unit.

The 

 indoor unit is the indoor part of the

reversible air to water Daikin ERHQ heat pumps. These units are
designed for wall mounted indoor installation and used for both
heating and cooling applications. The units can be combined with
Daikin fan coil units, floor heating applications, low temperature
radiators and sanitary water heating applications.

Heating/cooling units and heating only units

The 

 indoor unit range consists of two main

versions: a heating/cooling (EKHBX) version and a heating only
(EKHBH) version.

Both versions can optionally be delivered with an integrated backup
heater for additional heating capacity during cold outdoor
temperatures. The backup heater also serves as a backup in case of
malfunctioning of the outdoor unit. The backup heater models are
available for a heating capacity of 3, 6 and 9 kW, and – depending on
the heating capacity – for three different power supply specifications.

EKHBH016AA***

EKSWW150V3

EKHBX016AA***

EKSWW200V3

EKSWW200Z2

EKSWW300V3

EKSWW300Z2

Indoor unit for air to water heat pump and sanitary 

warm water tank for air to water heat pump system

Installation manual

READ THESE INSTRUCTIONS CAREFULLY BEFORE
INSTALLATION. KEEP THIS MANUAL IN A HANDY
PLACE FOR FUTURE REFERENCE.

IMPROPER INSTALLATION OR ATTACHMENT OF
EQUIPMENT OR ACCESSORIES COULD RESULT IN
ELECTRIC SHOCK, SHORT-CIRCUIT, LEAKS, FIRE OR
OTHER DAMAGE TO THE EQUIPMENT. BE SURE ONLY
TO USE ACCESSORIES MADE BY DAIKIN WHICH ARE
SPECIFICALLY DESIGNED FOR USE WITH THE
EQUIPMENT AND HAVE THEM INSTALLED BY A
PROFESSIONAL.

IF UNSURE OF INSTALLATION PROCEDURES OR USE,
ALWAYS CONTACT YOUR DAIKIN DEALER FOR
ADVICE AND INFORMATION.

THE UNIT DESCRIBED IN THIS MANUAL IS DESIGNED
FOR INDOOR INSTALLATION ONLY AND FOR AMBIENT
TEMPERATURES RANGING 0°C~35°C.

Indoor unit model

Backup heater capacity

Backup heater 

nominal voltage

EKHB*016AA3V3

3 kW

1 x 230 V

EKHB*016AA6V3

6 kW

1 x 230 V

EKHB*016AA6WN

6 kW

3 x 400 V

EKHB*016AA9WN

9 kW

3 x 400 V

EKHB*016AA6T1

6 kW

3 x 230 V

EKHB*016AA9T1

9 kW

3 x 230 V

NOTE

An EKHBH/X016AA indoor unit can only be connected
to an outdoor ERHQ0*AA-series.

Содержание EKHBH016AA

































Отзывы:

Нет отзывов