Altherma EKHBH016AA, Руководство по установке, Страница: 5 / 32

EKHBH/ EKSWW150-300V3/Z2
Indoor unit for air to water heat pump and sanitary warm water tank for air to water heat pump system
4PW36978-1C
Installation manual
2
Sanitary water tank option
An optional EKSWW sanitary water tank with integrated 3 kW
electrical booster heater can be connected to the indoor unit. The
sanitary water tank is available in three sizes: 150, 200 and 300 litre.
All models can be floor mounted, while the 150 litre model can be
wall mounted as well via option kit EKWBSWW150. The 200 and
300 litre models are also available as 400 V versions.
Drain pan kit
For heating/cooling versions (EKHBX), it is necessary to install the
EKHBDP drain pan kit (see
"Accessories" on page 2 ).
For more information concerning the drain pan kit, refer to
"Installation of the EKHBDP drain pan kit (only for EKHBX models)"
on page 9
.
Scope of this manual
This installation manual describes the procedures for unpacking,
installing and connecting all EKHBH/X indoor unit models and the
optional EKSWW sanitary water tanks.
Model identification
Indoor unit
Sanitary warm water tank (optional)
Drain pan kit (optional)
A
CCESSORIES
Accessories supplied with the indoor unit
See figure 1
Accessories supplied with the sanitary water tank
(optional)
See figure 2
Optional equipment
■
EKUSWW: installation kit, required for installation of EKSWWU*
sanitary tanks.
■
EKWBSWW150: kit, including a wall bracket for a sanitary tank
of 150 litres.
■
EKHBDP: drain pan kit, required for EKHBX models.
1 Heat pump capacity
2 Required heating capacity (site dependent)
3 Additional heating capacity provided by the backup heater
4 Equilibriumtemperature (can be set through the user interface,
refer to
"Field settings" on page 19 )
T
A
Ambient (outdoor) temperature
P
H
Heating capacity
NOTE
Especially for the United Kingdom
For installation of an EKSWWU sanitary water tank,
refer to the installation manual supplied with the
EKUSWW installation kit.
NOTE
Installation of the ERHQ heat pump outdoor is
described in the outdoor unit installation manual.
Operation of the indoor unit is described in the indoor
unit operation manual.
EK HB X 016 AA 3 V3
Backup heater nominal
voltage: (Optional)
V3 = 1P, 230 V
WN = 3P, 400 V
T1 = 3P, 230 V
Backup heater capacity (kW)
(Optional)
Series
Indication of heating/cooling capacity (kW)
(a)
(a) For exact values, refer to "Technical specifications" on page 28 .
X = heating and cooling,
H = heating only
Hydro Box
European Kit
T
A
4
3
1
2
P
H
EK SWW U 150 V3
Booster heater voltage
V3 = 1P, 230 V
Z2 = 2P, 400 V (only for 200 l and 300 l
models)
Indication of storage capacity in litres
Special version for United Kingdom only
Standard version when no letter is mentioned
Sanitary Warm Water
European Kit
EK HB DP 150
Drain Pan
Hydro Box
European Kit
1 Installation manual
2 Operation manual
3 Unpacking instruction sheet
4 Shut-off valve
5 Wall mounting bracket
6 Wiring diagram sticker (inside indoor unit cover)
7 Indoor unit cover fixing screw
1 Ther connection wire (12 m)
2 Prewired contactor and circuit breaker assembly
3 Contactor fixing screw
4 PG nipple
5 PG nut
NOTE For accessories supplied with the EKSWWU sanitary
water tank, refer to the manual supplied with the
EKUSWW installation kit.