Chapter 2: EthernetBlaster Communications Cable Administration
2–3
Resetting the Hardware
© June 2008
Altera Corporation
EthernetBlaster Communications Cable User Guide
3. Enter the new Quartus II remote connection password in the
New Password
field
and again in the
Confirm New Password
field. Click
Apply
.
The EthernetBlaster communications cable restarts. When the status LED emits a
steady green light, the EthernetBlaster has successfully reset and the new password is
effective.
Resetting the Hardware
The EthernetBlaster communications cable reset button is located on the Ethernet port
side of the hardware. See
Figure 2–3
.
Use a small pointed object such as a paper clip to press the machine reset button to
restart and reset all values to the default factory settings. See
Table 2–1
for a list of
factory default settings.
Figure 2–2.
Change Quartus II Remote Connection Password Page
Figure 2–3.
Machine Reset button
Table 2–1.
Default Factory Settings
Setting
Value
Connection Type
DHCP
Host name
acebXXXX
(1)
Domain name
Clear
Timeserver Name/IP
Clear
ETHERNET
DC12V
Machine Reset
Paper clip
Содержание Ethernet Blaster Communications Cable
Страница 4: ...iv EthernetBlaster Communications Cable User Guide July 2008 Altera Corporation...
Страница 6: ...vi List of Figures EthernetBlaster Communications Cable User Guide July 2008 Altera Corporation...
Страница 8: ...viii List of Tables EthernetBlaster Communications Cable User Guide July 2008 Altera Corporation...
