26
Figure 5-5 Block Diagram of Digital Camera Demonstration for DE2-115
Locate the project directory from the CD-ROM included and follow the steps below:
Directory: Demonstration / DE2_115_CLR
FPGA Bitstream Used: DE2_115_CLR.sof
1.
Ensure the connection is made correctly as shown in
X
Figure 5-6
X
. Make sure the CLR Card is
connected to
JP8 (HSMC)
of the DE2-115 board.
2.
Connect the VGA output of DE2-115 board to a VGA monitor, and the camera to
BASE1 (J2)
of the CLR card with a Camera Link cable.
3.
Copy the directory DE2_115_CLR from CLR-HSMC System CD-ROM to the host computer.
4.
Download the bitstream (DE2_115_CLR.sof) to the DE2-115 board.
5. Set the
SW[0]
to On (upper position) to show the BASE1 camera image (note*).
6.
Press
KEY [0]
on the DE2-115 board to reset the circuit.
Содержание CLR-HSMC
Страница 1: ...1 ...
Страница 12: ...11 Figure 3 1 Pin outs of Bank 1 on the HSMC Connector ...
Страница 13: ...12 Figure 3 2 Pin outs of Bank 2 on the HSMC Connector ...
Страница 14: ...13 Figure 3 3 Pin outs of Bank 3 on the HSMC Connector ...
