Altech AR 4070KF2E, Руководство по установке

Страница: 65 / 72

65
Wireless Test
This test should only be performed after the Wireless Basis has performed the
first-open function, when the switch output is no longer active.
The Wireless test should be performed prior to the wall installation in order to minimise
possible disturbances.
Press the SET button of the thermostat in order to test the assignment of the thermostats
or the wireless transmission. The heating zone assigned to the Wireless Basis will be
switched on for 1 minute, regardless of the current state of operation.
If the Wireless Thermostat cannot be assigned or if the assigned heating zone cannot be
switched during the Wireless test, the reception conditions for the base are insufficient.
An optional external receiver AB EX 4070 can be used in this case.