Altech AR 4070KF2E, Руководство по установке

Страница: 64 / 72

64
Assigning Heating Zones
Supply operation voltage to the Wireless Basis if this has not already been performed.
After that, the assignment „zone – Wireless Thermostat“ can be performed. The assign-
ment should be done from the installation place of the thermostat.
After the activation of learning mode at the Wireless base, (see Wireless base manual),
the desired heating zone can be assigned by pressing the SET button at the thermostat.
A log-on code will be sent to the base then.
you can find the complete instructions for the assignment „Wireless Thermostat - zone“
in the Wireless Basis AB 4071 manual.