![Altea erospace XR Flight Скачать руководство пользователя страница 23](http://html1.mh-extra.com/html/altea-erospace/xr-flight/xr-flight_operation-manual_2909114023.webp)
XR Flight Operations Manual Version 3.0
Copyright 2006-2018 Douglas Beachy. All Rights Reserved.
23
the SCRAM engines. Excessively overheating the SCRAM engines may cause an
explosion and destroy the ship.
1
To monitor your engine thrust and efficiency plus the G forces active on your ship,
refer to the
Engine Display
on the main panel (shown below). The top line shows a
gauge from 0-100. The green bars below it indicate 0-100% engine thrust for the
Main, Hover, and SCRAM engines, respectively. The green arrow on the
Effic
Line
shows your current main and hover engine efficiency; rocket engines are less
efficient when flying in an atmosphere, and so you will see the arrow move to the
right toward 100% efficiency as static pressure decreases during ascent in an
atmosphere
2
.
Engine Display Gauge Landed on Earth
The bottom part of the panel shows the G forces currently active on your ship.
Orbiter uses a left-hand coordinate system, and so the X axis shows acceleration
along the side-to-side axis, Y shows vertical acceleration (up-down), and Z shows
forward/aft acceleration. A green arrow indicates positive acceleration (
right
for X
axis,
up
for Y axis, and
forward
for Z axis), and red arrow indicates a negative
acceleration
(i.e., “
deceleration
”)
.
To monitor the fuel quantity remaining in your Main, RCS, and SCRAM tanks refer to
the
Fuel Display
as shown below:
1
Remember that SCRAM engine heat damage may be disabled in the
XR5VanguardPrefs.cfg
file if desired; in that case the gauge will continue to display
the diffuser temperature, but exceeding the limits will not damage the ship.
2
You may disable this realism feature by setting
EnableATMThrustReduction=0
in
your
XR5VanguardPrefs.cfg
file.