100-6262_R5 AP-4 User Guide Release Date: 4/28/20
13
16. This will start the countdown on the next screen showing the time in each phase of the cycle
and the total time remaining. It is recommended that the operator stay close by through the
deploy portion of the cycle to make sure there are no issues with the aerosol leaking into the
hallway or anywhere else. Then the operator can leave and come back at the end of the cycle
as indicated by the Total Remaining Time countdown.
17.
Once the cycle is complete, each phase will show “DONE” and the status at the bottom will
display “Cycle Complete”. At this point, press the “exit button to return to the main screen and
proceed to open the door, tear down the system setup, and ready the room for the next
patient.
