Altair MTX-416, Руководство пользователя

Страница: 7 / 22

7 MTX-416 - PROGRAMMABLE 4x16 INTERCOM MATRIX
After extracting the fuse holder, the fuse will appear, take out it and
change for the new one.
Insert the fuse holder into the mains connector again.
Make sure that the fuse is the right one: 2A slow blow type - T2AZ
CAUTION: Always make sure after changing the fuse, that it is the right one.
CONNECTING TO THE MAINS
The connection of the intercom matrix power supply to the mains takes place by
a standard cord included in the box.
Make sure that the unit power switch is at 0 position (turned off).
Insert the female I.E.C. connector of the tripolar cable into the unit power supply
male connector, placed at the rear panel.
Insert the male connector of the tripolar cable into the mains plug.
Turn on the unit power switch.
In that moment, all the leds of the unit
will light slightly, indicating that the unit is turned on
CAUTION:
Make sure that the mains voltage is the correct as well as their fuse is the right one.
INTERCOM / AUDIO CHANNELS CONNECTION
If we are going to use ALTAIR MTX-416 like intercom matrix, we will connect the intercom
channels CH1-CH4 to a unit with active intercom channels (ALTAIR EF-200, ALTAIR WBS-200, or any
compatible CLEAR COM
TM
). The signal distribution in the PHOENIX
TM
connector is the following one:
The cable and the connection to a XLR connector are described in the following graph:
ALTAIR MTX-416
INTERCOM CHANNEL
PHOENIX
TM
CONNECTOR WITH MALE XLR.
CH1-CH4