ASSEMBLY AND INSTALLATION:
INSTALLATION (Fig. 1)
1.
Unscrew the
lock nuts
[B]
from the
fixture screws
[G], but leave the
fixture screws
[G]
and
hex nuts
[E] on the
mounting bracket
[D].
2.
Pull the
power supply wires
[H, J, & L] out from the
outlet box
[O], and attach the
mounting bracket
[D] to the
outlet box
[O], using the
mounting screws
[F].
3.
NOTE:
This product is not for use with rectangular junction boxes.
4.
Strip approximately 63 mm / 0.25 in / 0.25 po of insulation from each supply wire from
the
outlet box
[O]. Raise the
fixture
[A]
to the wall, bringing the
wall plate
[N] close to
the
outlet box
[O]. Make the following wire connections using the
wire nuts
[C]:
[H]
White
(neutral)
supply wire
to
[I]
White fixture wire
[J]
Black
(hot)
supply wire
to
[K]
Black fixture wire
[L]
Supply ground wire
to
[M]
Fixture ground wire
Wrap each wire connection with 5 cm / 2 in / 2 po of electrical tape.
4
Fig. 1
A. Fixture
B. Lock Nut
C. Wire Nut
D. Mounting Bracket
E. Hex Nut
F. Mounting Screw
G. Fixture Screw
H. White Supply Wire
I.
White Fixture Wire
J. Black Supply Wire
K. Black Fixture Wire
L. Supply Ground Wire
M. Fixture Ground Wire
N. Wall Plate
O. Outlet Box
C
K
J
O
I
F
D
N
H
G
L
M
E
A
B
