Altai Technologies Ltd. All rights reserved
Altai C1n Super WiFi CPE Installation Guide
TPS13-002_rev1.0
1.
Introduction
This guide is designed to provide the information needed to mount Altai C1n Super
WiFi CPE at the site location.
The document is applicable for hardware platform
C1n
and the following models.
Product name :
Altai C1n Super WiFi CPE
It is assumed in this document that a site survey has been performed before the site
installation. The appropriate antenna pole and AP locations have been selected. It is
a good practice to have a document consists of a map and drawing illustrating the
AP and poles locations. A planning on IP network is also an important issue for
network planning.
The user may need to refer the following document during C1n installation and
Configuration.
[1]
C1n Configuration Manual
[2]
C1n Super WiFi CPE Data Sheet
2.
Field Installation
2.1.
System Configuration Requirements
Check the equipments and the installation kits against the packing list to ensure that
the equipment part numbers, parts, and the ancillary equipments included in the
shipment match what is specified on the packing list. The shipment consists of a C1n
Super WiFi Pico Access Point and an installation kit in the container. If there is any
difference from the packing list, you will need to contact the sales representative.
Please, inspect the equipment to see if there is any shipping damage. If it does have
any damage, you could contact the sales representative for repair or replacement.
