manualshive.com logo in svg

Alstom MiCOM P54 Series, Техническое руководство, Страница: 731 / 1024

Поделиться
Скачать
Alstom MiCOM P54 Series Скачать руководство пользователя страница 731

Firmware Design 

P54x/EN FD/La4

 

MiCOM P543, P544, P545 & P546

 

 

(FD) 9-5

 

FD 

1.2 

Software overview 

The software for the relay can be conceptually split into four elements; the real-time 
operating system, the system services software, the platform software and the protection 
and control software.  These four elements are not distinguishable to the user, and are all 
processed by the same processor board.  The distinction between the four parts of the 
software is made purely for the purpose of explanation here. 

1.2.1 

Real-time operating system  

The real time operating system is used to provide a framework for the different parts of the 
relay’s software to operate within.  To this end the software is split into tasks.  

The real-time operating system is responsible for scheduling the processing of these tasks 
such that they are carried out in the time available and in the desired order of priority.  The 
operating system is also responsible for the exchange of information between tasks, in the 
form of messages. 

1.2.2 

System services software  

The system services software provides the low-level control of the relay hardware.  For 
example, the system services software controls the boot  of  the  relay’s  software  from  the         
non-volatile flash EPROM memory at power-on, and provides driver software for the user 
interface via the LCD and keypad, and via the serial communication ports.  The system 
services software provides an interface layer between the control of the relay’s hardware and 
the rest of the relay software. 

1.2.3 

Platform software  

The platform software deals with the management of the relay settings, the user interfaces 
and logging of event, alarm, fault and maintenance records.  All of the relay settings are 
stored in a database within the relay which provides direct compatibility with Courier 
communications.  For all other interfaces (i.e. the front panel keypad and LCD interface,  
IEC 60870-5-103, DNP3.0 and IEC 61850) the platform software converts the information 
from the database into the format required.  The platform software notifies the protection & 
control software of all settings changes and logs data as specified by the protection & control 
software. 

1.2.4 

Protection & control software  

The protection and control software performs the calculations for all of the protection 
algorithms of the relay.  This includes digital signal processing, filtering, and ancillary tasks 
such as the measurements.  The protection & control software interfaces with the platform 
software for settings changes and logging of records, and with the system services software 
for acquisition of sample data and access to output relays and digital opto-isolated inputs. 

1.2.5 

Disturbance recorder 

The analog values and logic signals are routed from the protection and control software to 
the disturbance recorder software.  The platform software interfaces to the disturbance 
recorder to allow extraction of the stored records. 

Содержание MiCOM P54 Series

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов