FR
ES
DE
SE
IT
19
-EN
1
Foot brake lead (Yellow/Black)
Connect this lead to the foot brake lead powered
when the foot brake is pressed.
2
Hand brake lead (Yellow/Blue)
Connect this lead to the hand brake lead
powered when the hand brake is pulled.
3
Monitor control lead (White/Pink)
Connect when upgrading with touch panel
compatible products such as the IVA-D300.
45
Remote control output lead (White/Brown)
To remote control input lead of ALPINE products
used in the system.
6
Reverse Lead (Orange/White)
Use only when a back-up camera is connected.
Connect to the plus side of the car’s reverse
lamp that lights when the transmission is shifted
into reverse (R).
Switches the video picture to the back-up
camera. This is linked with putting the car into
reverse (R).
7
ACC power lead (Red)
To ACC power lead powered when engine key
position is ACC.
8
Fuse (7.5A)
9
Ground lead (Black)
Connect the lead to a good chassis ground on
the vehicle. Make sure the connection is made to
bare metal and is securely fastened using the
sheet metal screw provided.
p
Foot brake lamp
q
Brake connector (Included)
w
Foot brake lead
e
Foot brake switch
r
Hand (parking) brake lamp
t
Hand (parking) brake lead
y
Hand (parking) brake switch
u
Headphone
i
Main monitor
o
Connection cable
;
RGB cable
a
To RGB output terminal
s
Made by Alpine navigation
d
Audio input connectors (AUX 1)
Use these connectors to input the audio signals
from a DVD player, video deck etc.
f
Video input connector (AUX 1)
Use this connector to input the video signals
from a DVD player, video deck etc.
g
Audio input connectors (AUX 2)
Use these connectors to input the audio signals
from a DVD player, video deck etc.
To prevent external noise from entering the
audio system.
• Locate the unit and route the leads at least
10cm away from the car harness.
• Keep the battery power leads as far away from
other leads as possible.
• Connect the ground lead securely to a bare
metal spot (remove the coating if necessary)
of the car chassis.
• If you add an optional noise suppressor,
connect it as far away from the unit as
possible. Your Alpine dealer carries various
Alpine noise suppressors, contact them for
further information.
• Your Alpine dealer knows best about noise
prevention measures so consult your dealer for
further information.
h
Video input connectors (AUX 2)
Use this connector to input the video signals from
a DVD player, video deck etc.
j
Audio output connectors
Use these connectors to output audio signals to
a rear monitor, etc.
k
Video output connector
Use this connector to output video signals to a
rear monitor, etc.
• When connecting to an IVA-D300 or VPE-S431, use
the “AUX IN 1” connector. When connecting a rear
view camera, use the “AUX IN 2”.
