13
-EN
Fast Forward and Backward
1
Press and hold the DN
g
or
f
UP button
to quickly move backward or forward
respectively until you reach the desired portion.
NOTE
This feature works only in the CD playback mode.
Repeat Play on Single Track or
Entire Disc
1
Press the "F" (Function) button.
The function indicator at the top side of the "F"
button will turn off.
2
Press the RPT (Repeat) button to display "RPT"
or "RPT ALL" to play back repeatedly the track
being currently played or the entire disc
selected.
NOTE
Single track cannot be repeated during M.I.X. play.
3
Press the "F" button to activate the normal
mode.
The function indicator at the top side of the "F"
button will illuminate.
Controlling CD Changer (Optional)
If an optional Alpine 6-disc CD Changer (M-Bus)
is connected to the 8-pin DIN connector of the
TDM-7577R/TDM- 7576R/TDM-7575R/TDM-
7574R, you can control the CD Changer using the
TDM-7577R/TDM-7576R/ TDM-7575R/TDM-
7574R.
NOTE
The CD controls on the TDM-7577R/TDM-7576R/TDM-
7575R/TDM-7574R for the CD operation are functional
only when the CD Changer is interconnected with the
TDM-7577R/TDM-7576R/TDM-7575R/TDM-7574R.
1
Press the SOURCE button to activate the CD
Changer.
The display shows the disc number and track
number.
NOTE
To start play or pause play, press the
:
/
J
button.
2
Make sure that the Function indicator illuminates,
then press the Preset buttons to select the
desired disc loaded in the CD Changer.
Music Sensor (M.S.) Skip
1
Press the DN
g
button once to return to the
beginning of the current track.
If you wish to return to the beginning of a track
further back, repeatedly press until you reach the
desired track.
Press the
f
UP button once to advance to the
beginning of the next track.
If you wish to advance to a track further ahead,
press repeatedly until the desired track is
reached.
NOTE
The music sensor feature is functional in the play or
pause mode.
CD Changer Operation
DN
g
f
UP
SOURCE
F
RPT
Preset buttons
