Alpine PKG-RSE3DVD, Быстрый старт

Страница: 7 / 9

Wireless Headphone
(Optional)
Headphone Receivers
L
R
1) Battery Cover
2) Volume Control
3) Power Switch
4) Power Indicator LED
Operation
Read carefully to prevent damage to the
headphone or your ears:
WARNING: Before turning on the power, remove
headphones and turn the volume down as low as possible.
1) Be sure the batteries are properly installed in the
headphones.
2) Turn the headphones volume completely down
before placing it on your ears and turning on the
power.
3) Turn on the headphone power and adjust the
headphone volume to a comfortable level (You
can increase the audio source volume if needed).
Battery Installation
Place two AAA batteries into the battery compartment of
the headphone(s), making sure that the battery polarity is
correct.
2
Press SELECT / SETUP to switch
to SYSTEM setting menu from
AUDIO&SCREEN setting menu.
3
Press
s
or
t
to change each item.
Setting the IR Transmitter
Press or to select A/B/OFF. (Default: A)
Setting the FM Modulator
Press or to select FM Radio region
(OFF/USA/OTHERS). (Default: OFF)
Setting the FM Frequency
Press or to select desired FM Radio
Frequencies between 88.1 MHz to 92.1 MHz for
USA and Europe, and 88.1 MHz to 90.0 MHz for
Japan. (Default: 89.1 MHz)
• USA frequency step is 0.2MHz and Europe and Japan
is 0.1MHz.
Setting the Dimmer
Press or to select High/Mid/Low.
(Default: AUTO)
AUTO adjusts the LCD backlight brightness
automatically by sensing the ambient light from the
luminance sensor.
ENT
Dimmer
Front Control Keys
Setting the Dimmer Low Level
Press or to select low level of Dimmer
between 0 (min.) to 15 (max.). 15 (max.) is the
same brightness level with HIGH on Dimmer
menu.
Resetting to the Factory Default
Press ENTER Key, the system changes to
Factory Default System Setting. Entire settings
include Picture, Visual EQ, Display Mode
are also reset. DVD Setup values will not be
affected
.