Insert a disc with the label side facing up.
To load discs, see “Loading and Unloading Discs”.
Playback starts.
• The reverse side of a double-sided DVD will not be
played automatically. Remove the disc, turn it over,
and reinsert it.
• It may take some time before playback starts after
loading a disc.
DVD Auto Play
The main movie will play automatically without pressing
Play or Enter button, when DVD is inserted, if AUTO or
SKIP mode is selected on DVD Auto Play under System
menu. See owner’s manual for detail.
If a menu screen appears
On DVDs and video CDs, menu screens may appear
automatically, when DVD Auto Play is set to NORMAL.
Perform the operation described below to start playback.
• For many discs, the menu screen can also be
displayed by pressing
MENU
.
DVD menu
Press
s
,
t
,
or
to select the desired item,
then press
ENTER
.
• For some discs it is possible to select items directly
from the menu screen using the
number keys
(“0”
to “9”).
Setting System Control
IR transmitter, FM transmitter, FM frequency and, dimmer
can be adjusted for all available sources.
• Once this adjustment is made, all sources are
affected.
ENT
SELECT
ENT
Front Control Keys
SETUP
Remote Control
1
Press and hold
SELECT
for at least 2
seconds to show the SETUP menu on
Front Control Keys. Or Press
SETUP
button on Remote Control.
DVD
The instruction includes Built-In DVD, EXT-DVD,
DVD-HD. DVD player can be also used for CD/
CD-R/CD-RW.
ENT
SELECT
POWER
MENU
n
ENT
Front Control Keys
DISPLAY
RETURN
n
REPEAT
MENU
ENTER
Number
Keys
(0 to 9)
DVD-HU
EXT-DVD
+10
*1
CLEAR
*2
Remote Control
DVD
st
TOP.M
Playing DVD/Video CD
Caution
• Not all functions will operate for every DVD. See
the individual DVD’s instructions for details on
the features supported.
• Fingerprints on a disc may adversely affect
playback. If a problem occurs, remove the disc
and check for fingerprints on the playback side.
Clean the disc if necessary.
• When using the remote control, be careful to press
one button at time. Pressing multiple buttons at
the same time may cause erroneous operation.
• If you switch the power or ignition key OFF
during playback, playback will continue where
you left off when you resume playback.
• If you try to perform an invalid operation (based
on the type of disc being played), the following
mark is displayed on the monitor screen:
• A disc type must match the setting of TV System
under Audio & Screen menu. If a wrong type
disc is inserted, the message “VIDEO SIGNAL
SYSTEM IS NOT CORRECT” is displayed, and
playback is not available.
Содержание PKG-RSE3DVD
Страница 1: ...DVD EMTERTAINMENT SYSTEM...
Страница 2: ......
