11
-EN
TV Tuner Control
To control TV tuner from the Front Panel Controls, set
source name to TV in the System Setup.
• Refer to ALPINE TV Tuner Operation Manual for
details.
ENT
Front Panel Controls
Remote Control
Selecting Preset Channel
Press
CH
▲
or
CH
▼
to select preset channel
memorized by
SCAN
on the remote control or
ENT
on the Front Panel Controls.
Seeking Channel Manually
Press
or
to seek Channel manually.
Channel moves UP or DOWN one by one.
Press and Hold
or
, Channel Seek will start
and stop when next higher or lower available CH
is found.
Memorizing Channel
Press
SCAN
on the remote control or
ENT
on the
Front Panel Controls to memorize the receivable
channels in the entire TV broadcast band.
Wireless Headphone
Headphone Receivers
L
R
1
2
5
4
3
1) Infrared Sensors; Receive signal from the
transmitter.
2) Battery Cover
3) Volume Control
4) Power Switch
5) Power Indicator LED
Operation
Read carefully to prevent damage to the
headphone or your ears:
WARNING: Before turning on the power, remove
headphones and turn the volume down as low as possible.
1) Be sure the batteries are properly installed in the
headphones.
2) Turn the headphones volume completely down
before placing it on your ears and turning on the
power.
3) Turn on the headphone power and adjust the
headphone volume to a comfortable level (You can
increase the audio source volume if needed).
Battery Installation
Place two AAA batteries into the battery compartment of
the headphone(s), making sure that the battery polarity is
correct.
TW_PKG-RSE.indb EN11
TW_PKG-RSE.indb EN11
4/25/05 4:51:30 PM
4/25/05 4:51:30 PM
