9
-EN
System Setup Operation
IR transmitter, FM transmitter, FM frequency, source
names and Audio levels can be adjusted for all available
sources.
• Once this adjustment is made, all sources are affected.
SELECT ENT
Front Panel Controls
ENT
SELECT
Remote Control
1
Press and hold
SELECT
for at least 2
seconds to show the SETUP menu.
2
Press
SELECT
twice to switch to SYSTEM
screen.
3
Press
▲
or
▼
to change each mode
IR TRANS:
Press and to select A/B/OFF. (Default: A)
FM TRANS:
Press and to select FM Radio region (OFF/
USA/JPN). (Default: OFF)
FM FREQ:
Press
and
to select desired FM Radio
Frequencies between 88.1 MHz to 92.5MHz
for USA and 88.1 MHz to 90.0 MHz for Japan.
(Default: 89.1 MHz)
• USA frequency step is 0.2MHz and Japan is
0.1MHz.
SOURCE NAME 1:
Press
and
to select AUX1/DVD/DVD-HU/TV/
GAME/USER (Default: DVD)
SOURCE NAME 2:
Press
and
to select AUX2/DVD/DVD-HU/TV/
GAME/USER/OFF* (Default: TV)
SOURCE NAME 3:
Press
and
to select AUX3/GAME/USER/OFF*
(Default: GAME)
• When OFF is selected, source selection skips to
the next input. (AUX1 cannot be turned OFF.)
AUDIO LEVEL 1 (Setting for Aux1):
Press
and
to select HIGH/MID/LOW. (Default:
HIGH)
AUDIO LEVEL 2 (Setting for Aux2):
Press
and
to select HIGH/MID/LOW. (Default:
HIGH)
AUDIO LEVEL 3 (Setting for Aux3):
Press
and
to select HIGH/MID/LOW. (Default:
HIGH)
FACTORY DEFAULT:
Press
ENT
Key, the system changes to Factory
Default System Setting. Entire settings include
Picture, Visual EQ, Display Mode are also reset.
Customizing Source Name
Your desired OSD source name can be defi ned up to 6
characters.
4
Press
and
to select USER.
5
Press
ENT
key. Character setting menu
appears.
6
Press
▲
▼
and
ENT
key to select the
character “A-Z”, “0-9”, “-“, space and “.”.
“DEL”:
Delete one character at a time.
“CLR”:
Clear entire characters.
“OK”:
Confi rm source name and exit
from character setting menu.
• This setting will not disappear until selecting OK to exit
the screen.
TW_PKG-RSE.indb EN9
TW_PKG-RSE.indb EN9
4/25/05 4:51:14 PM
4/25/05 4:51:14 PM
