manualshive.com logo in svg

Alpine Opera Classic, Руководство по установке

Поделиться
Скачать
Alpine Opera Classic Скачать руководство пользователя страница 24

23

Eco/Classic Installation Guide and Technical Specification

Braked

Unbraked

3.4 

Operation of the Side Rails

To use the side rails, lift the upper side rail until it locks into place in the highest position. 

To lower the side rails, lift the upper side rail and at the same time push the release catch 
for the side rail lock and lower the side rail. 

The side rails are designed only to prevent a person falling out of the bed, under no 
circumstances should they be climbed or leaned on!

When lowering the rails take care not to drop them, they should be lowered carefully.

ATTENTION:

If the side rail is in its high position, ensure that it is always safely locked into place!

3.5 

Operation of the Castors

All castors on the bed can be braked and must always be in the braked position during 
normal operation.

ATTENTION:

The brakes must only be released to move the bed! Please also refer to the Safety 
Information!

Содержание Opera Classic

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды