Alpine NVE-N077PS, Руководство по установке и подключению, Страница: 7 / 13

7
1 2 3 4 5
6 7 8 9 10
(5A)
(5A)
A
A
1
6
5
10
POWER
EX-2 EX-1 TO DISP. MIC/SW
GPS ANT.
3-1. NVE-N077PS Wiring Diagram With CVA-
1003R/TME-M750
* Improper connection of the
speed pulse line may cause
important safety features of
the vehicle to fail (such as
the brakes or air bags). Such
failures may result in an
accident and loss of life. We
strongly recommend that the
installation be performed by
a trained, authorized Alpine
dealer.
System expansion
ports To RDS-TMC Receiver (OPTIONAL)
NOTE:
To connect an Alpine RDS-TMC
Receiver, consult your Alpine dealer.
Power Connector Pin
Configuration
1
2
3
4
5
6
7
8
9
10
Ground (Black)
ACC (Ignition) (Red)
Mute (Pink/Skyblue)
Open
Open
Battery (Yellow)
Dimmer In (Illumination) (White/Blue)
Speed Sensor (Green/White)
Parking Brake (Yellow/Blue)
Reverse (Orange/White)
13P RGB Extension Cable
Included
Battery Lead (Yellow)
ACC (Ignition) (Red)
Ground (Black)
Dimmer In (Illumination) (
+
) (White/Blue)
Parking Brake (Yellow/Blue)
Reverse (
+
) (Orange/White)
Mute (Pink/Skyblue)
GPS Aerial (Included)
BATTERY
Connect to a metal
part of classis
body with screw
To the parking brake
signal line
To the vehicle speed
pulse line
Use this to connect
a device having the
IN-INT function (
−
)
output for Audio Mute
To the Illumination
signal line
To the Acc power lead
To reverse lights
(+12V signal)
*
Speed Sensor (Green/White)
Connect to VSS (Digital or Analog 0V
−
3V)