Alpine NVE-N077PS, Руководство по установке и подключению, Страница: 12 / 13

12
3
Cut the carpet in "x" shape with a cutter and
insert the floor bases
2
from under side of
the carpet.
4
Mount the unit on the carpet with spring
washers (M6)
6
and wing nuts (M6)
8
.
Continued to step 5 "Securing leads, etc."
5
Securing leads, etc.
Make sure leads are not pinched by moving parts
such as the seat rail, etc. Also check for dam-
aged from sharp edges or protrusion.
6
Connect the battery (
−
) terminal.
2
8
6
4. Confirmation
1
Turn on the engine key. Make sure the unit is
operating correctly by referring to the Own-
er’s Manual.
2
Make sure all factory components such as the
brake lamps, etc. work correctly.
ON
a
Remote control holder mounting method
•
If the remote control is in direct sunlight, remove it
from the holder and keep it in the glove box.
•
When the holder cannot be mounted securely with
double-sided adhesive tape
!
, mount it by using
screws
"
.
Reinforcement screws
"
* Double-sided adhesive tape. (Before attaching
the tape, make sure the mounting location is free
from dust or dirt.)
Console box, etc.
!
*
Remote control
Remote
control
holder
Protective
Paper
a When mounting with floor base brack-
ets
1
Mount the brackets
1
.
Mount the brackets
1
at both sides of the unit
with screws with double washer (M5
×
8)
3
.
2
Determine mounting position of the floor
bases
2
for placement under the carpet.
Depending on the
locations of the mounting
screw holes, the
mounting brackets (for
the left and right) can be
used on either side.
3
3
1
8
6
2