Alpine iXA-W404E, Руководство пользователя

Страница: 42 / 64

40
-EN
01GB06iXA-W404E.fm
ALPINE iXA-W404E 68-14470Z14-A (EN)
You can place a call by inputting the telephone number directly by the
numeric keypad screen on the unit.
The numeric keypad screen is displayed. Touch (input)
the telephone number, and then touch
[ ] .
The call is placed.
• About the numeric keypad
: closes the numeric keypad input screen.
ALL DEL: deletes all input numbers.
BS (Back Space): deletes a previous number.
• The speed dial is recalled and the telephone is called by directly
inputting the number which is registered with the speed dial on the
mobile phone on the numeric keypad screen of this unit (SPEED
DIAL).
Bluetooth Audio Function
Audio information of a Bluetooth compatible mobile phone, a portable
player, etc., is controllable/playable wirelessly* from this unit.
* To play back audio, a mobile phone or a portable player conforming
to A2DP (Advanced Audio Distribution Profile) or AVRCP (Audio/
Video Remote Control Profile) is required.
Not all functions work with all devices.
• During a call, sound on the Bluetooth audio source is muted.
Recalling the Bluetooth Source
1
Press SOURCE to activate mode switching
screen.
2
Slide the display horizontally with your finger to
select Audio/Visual mode.
Each time you slide the display, the mode switches
circularly in the following order:
Audio/Visual Navigation Camera Telephone
Multi Info Audio/Visual
3
Slide the display vertically with your finger, or press
SOURCE repeatedly to select BT AUDIO source.
4
Press /ENTER .
The BT AUDIO source is activated and the display changes
to the BT AUDIO main screen.
Selecting the desired Song
Touch [ ] .
Returns the beginning of the song being played back.
Touch [ ] .
Forwards the next song.
Pausing
Touch [ ] .
A playback stops. Touching again will resume a playback.
When the optional rearview camera HCE-C107D is connected, rear
view video can be output to the monitor.
• Be sure to set “Camera IN” to DIRECT before using the rearview
camera HCE-C107D, refer to “Setting the Rear Camera Input” on
page 18.
Switching the Rear Camera Screen
(Optional)
The rear view video will be displayed for the two situations as below.
1
Shift the gear lever to the reverse (R) position.
The rear view image is displayed while the car remains in
reverse.
2
If you shift the gear lever to a position other than
reverse (R), the monitor returns to the previous
screen.
• Be sure to also check behind the car visually. Use the camera image
to assist in showing conditions behind the car.
• This function is effective when the reverse wire is properly connected.
Press (CAMERA).
The Camera mode is activated and the rear view video is
displayed.
Press again will return to Audio/Visual mode.
• The Camera mode can also be activated by selecting “Camera” in
mode switching screen. For details, refer to the step 2 of “Recalling
the Source” on page 9.
Dialing a Number Using Direct DIAL INPUT
Bluetooth Audio Operation
HCE-C107D
Operation (Optional)
Displaying the rear view video while the
car is in reverse
Displaying the rear view video manually
01GB00iXA-W404E.book Page 40 Tuesday, March 3, 2009 5:01 PM