29
-EN
01GB06iXA-W404E.fm
ALPINE iXA-W404E 68-14470Z14-A (EN)
Alpine introduces IMPRINT - the world's first technology that
thoroughly eliminates in-car acoustic problems that normally degrade
sound quality. This enables us to experience music the way the artist
intended. Refer to “About IMPRINT” (page 35).
When the IMPRINT audio processor (PXA-H100) (sold separately) is
connected to this unit, MultEQ and the following sound adjustment can
be performed.
Changing MultEQ mode
MultEQ, developed by Audyssey Labs, automatically corrects the audio
for the listening environment. The system is optimized for selected
positions in the vehicle. To accomplish this, MultEQ must take
measurements of the vehicles response characteristics. For details on the
set up procedure, consult your authorized Alpine dealer.
1
Press and hold
SOUND/IMPRINT
button of the
unit for at least 2 seconds, the MultEQ mode
selection screen will be displayed.
2
Touch
[
]
or
[
]
of Multi EQ to change the setting.
Setting contents: OFF / CURVE 1 / CURVE 2
• The Curve mode can be selected only when CURVE 1 and CURVE 2
are stored.
• When MultEQ is set to CURVE 1 or CURVE 2, Media Xpander,
X-Over, T.Corr, Subwoofer Phase, Subwoofer Channel, TW Setup,
P-EQ, G-EQ and F-EQ can not be adjusted.
Adjusting Sound Setting in Manual Mode
You can change these sound settings to create your own preference
when the MultEQ mode is set to OFF (Manual Mode).
1
Check that the Defeat mode is off.
2
Press and hold
SETUP
for at least 2 seconds.
The SETUP selection screen is displayed.
3
Touch
[
]
of Audio Setup.
The AUDIO SETUP screen appears.
• The AUDIO SETUP screen can also be activated directly by pressing
SOUND/IMPRINT.
4
Touch
[
]
of A.Processor.
The A.PROCESSOR list screen appears.
5
Touch
[
]
,
[
]
or
[
]
, etc., of the desired item to
change its setting.
Setting items: Media Xpander / X-Over / T.Corr / T.Corr Parameter /
G-EQ / P-EQ / F-EQ / TW Setup
*
* This function can be operable only when PXA-H100 (sold
separately) is connected and 2.2ch (3WAY) mode is set. For details,
refer to the Owner’s Manual of PXA-H100.
• Touch [
] to return to the previous screen.
• Touch and hold [
] for at least 2 seconds to return to the main
source screen that was displayed before the setup operation was
started.
• Media Xpander, F-EQ, P-EQ and G-EQ Adjustment are inoperable
when Defeat is set to ON.
10 typical equalizer settings and 6 user’s preset setting are preset at the
factory for a variety of musical source material.
Setting item: F-EQ
1
Touch
[
]
of F-EQ.
The F-EQ setup screen appears.
2
Touch
[
]
or
[
]
of the desired type to set to ON.
Flat / Pops / Rock / News / Jazz&Blues / Electrical Dance /
Hiphop&Rap / Easy Listening / Countryuser EQ / Classical /
User1 / User2 / User3 / User4 / User5 / User6
• Only one type can be set to ON.
• By selecting User’s 1 to 6, you can recall the stored preset number in
“Adjusting the Graphic Equalizer Curve (G-EQ)” (page 30) or
“Adjusting the Parametric Equalizer Curve (P-EQ)” (page 30) .
Depending on the response characteristics of the speaker, care should be
taken when setting the response slope of the high range speaker to
FLAT in 2.2ch (3WAY) mode (see “Adjusting the Crossover Settings
(X-Over)” on page 31), as speaker damage may result.
Setting item: TW Setup
Touch [
] or [
] of TW Setup to select Maker’s or User’s.
• The TW Setup mode can only be selected if the FRONT/REAR/
SUBW. (4.2CH)/3WAY (2.2CH) switch on the IMPRINT audio
processor (PXA-H100) is set to 3WAY (2.2CH).
MX (Media Xpander) makes vocals or instruments sound distinct
regardless of the music source. The FM radio, CD, USB memory and
iPhone/iPod, will be able to reproduce the music clearly even in cars
with a lot of road noise.
Setting item: Media Xpander
1
Touch
[
]
or
[
]
of Media Xpander to select ON or
OFF.
IMPRINT Operation
(Optional)
The Parking Brake must be engaged to access the IMPRINT
mode screen. Attempting to access this screen while driving will
display the warning-CAN’T OPERATE WHILE DRIVING.
OFF:
Adjust the audio settings manually to create your own
preference.
CURVE 1/
CURVE 2:
Corrects the audio for the listening environment
automatically.
Use steps 1 to 5 to select one of the Sound menu
modes to modify. See the applicable section below for
details about the selected item.
Equalizer Presets (F-EQ)
Setting the Response Slope for the High
Range Speaker (TW Setup)
Maker’s:
As protection from possible speaker damage, FLAT
cannot be set for the response slope of the high
range speaker in 2.2ch (3WAY) mode.
User’s:
The FLAT setting is possible in 2.2ch (3WAY) mode.
Setting the MX Level (Media Xpander)
OFF:
Turns off the MX effect of every music source.
ON:
Turns on the specified MX mode.
01GB00iXA-W404E.book Page 29 Tuesday, March 3, 2009 5:01 PM
Содержание iXA-W404E
Страница 2: ......
Страница 52: ...50 EN List of World Clock For details see page 13 Information...
