20
-EN
The background texture will automatically change each time the
ignition key is turned off and turned back on again.
Setting item: Auto Background
Setting contents: OFF / ON
* Wallpapers downloaded from “Downloading the Background data”
(page 27) are recalled.
Adjustment becomes necessary when the display position on the LCD
and the touch position on the touch panel do not match.
Setting item: Screen Alignment
Setting contents:
/ RESET
1 Touch
[
]
of Screen Alignment.
The adjustment screen appears.
2 Accurately touch the
mark provided in the lower left
corner of the screen.
The screen changes to the adjustment screen.
3 Accurately touch the
mark provided in the upper right
corner of the screen.
This completes adjustment, and returns to the DISPLAY
setup mode screen.
•
If you have touched a location other than the
mark, touch
[RESET]
to restore the adjustment screen to the initial setting.
•
If you touch
[
]
on the adjustment screen, no adjustment is done
and the Display setup screen is restored.
You can turn off the screen display to reduce power consumption.
This additional power enhances the sound quality.
Setting item: Display
Setting contents: OFF / ON
•
If any button on the unit is pressed during display off mode, the
screen will be displayed for 5 seconds to show the operation before
returning to display off mode.
General Setup Operation
1
Press and hold
SETUP
for at least 2 seconds.
The SETUP selection screen is displayed.
2
Touch
[
]
of General Setup.
The GENERAL SETUP screen appears.
3
Touch
[
]
,
[
]
or
[
]
etc., of the desired item to
change its setting.
Setting items:
Calendar Adjust / Clock / Clock Adjust / T/ZONE / Clock Mode /
Daylight Saving Time / Beep / Auto Scroll / Language Select /
LED Dimmer Level
4
Touch
[
]
to return to the previous screen.
Touch and hold
[
]
for at least 2 seconds to return to the
main source screen that was displayed before the setup
operation was started.
•
Immediately after changing the settings of General Mode (While the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF. Otherwise, the settings may not be changed.
Setting Automatic Background Textures
OFF:
Turns off the Auto Background Texture Scroll mode.
ON:
Turns on the Auto Background Texture Scroll mode.
The background textures will scroll when the ignition key
is turned off once and turned back on again as follows:
MODE1
MODE2
MODE3
MODE4
MODE5
*
MODE6
*
MODE1
Adjusting the Touch Panel
Display On and Off
General Setup
To display the General mode screen:
To watch a video source, your vehicle must be parked with the
ignition key in the ACC or ON position. To do this, follow the
procedure below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
•
For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the General mode operation has
been released. Engaging the parking brake can reactivate the
General mode, as long as the car’s ignition has not been turned
off. It is not necessary to repeat the above procedure (1 through
3) of “To display the General mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the General mode screen.”
The following steps 1 to 4 are common operations to each
“Setting item” of General Setup. Refer to each section for
details.
Содержание IXA-W404 - 2-DIN 4.3" iPod Control Car Receiver
Страница 2: ......
Страница 65: ...63 EN List of World Clock For details see page 14 Information...
