Alpine IXA-W404 - 2-DIN 4.3" iPod Control Car Receiver, Руководство пользователя

Страница: 19 / 79

17
-EN
Switching Display Modes
While your vehicle is parked, touch [WIDE] on the visual
source screen.
Each touch changes the display modes as follows:
In Mode 1 (Wide), the monitor displays a normal picture wider to
fit in a wide-screen monitor by evenly stretching out the picture
horizontally.
In Mode 2 (Cinema), the monitor displays a normal picture by
stretching out the picture horizontally and vertically. This mode is
good for displaying a cinema type picture at the 16:9 ratio.
In Mode 3 (Normal), the monitor displays a normal picture at the
center of the screen with a vertical black band at each side.
Source Setup Operation
1
Press and hold SETUP for at least 2 seconds.
The SETUP selection screen is displayed.
2
Touch [ ] of Source Setup.
The SOURCE SETUP screen appears.
3
Touch the title of your desired setup mode.
Radio Setup *
1
/ Sirius Setup *
2
/ Bluetooth Setup *
3
/
iPod Setup
*
1
Displayed when the optional HD Radio MODULE is connected.
*
2
Displayed when the optional SIRIUS receiver box is connected.
*
3
Displayed when the optional BLUETOOTH INTERFACE
(KCE-400BT) is connected and “Bluetooth IN” is set to ADAPTER
(page 24).
• When the current source is HD Radio, SIRIUS, USB or iPod, you can
also recall the SETUP list of the current source directly by pressing
SETUP .
4
Touch [ ] , [ ] or [ ] etc., of the desired item to
change its setting.
Radio Setup:
Digital Seek
Sirius Setup:
Alert List / Song Alert / Game Alert
MODE 1 MODE 2 MODE 3 MODE 1
(WIDE) (CINEMA) (NORMAL) (WIDE)
Setup
Source Setup
To display the Source mode screen:
To watch a video source, your vehicle must be parked with the
ignition key in the ACC or ON position. To do this, follow the
procedure below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the Source mode operation has been
released. Engaging the parking brake can reactivate the Source
mode, as long as the car’s ignition has not been turned off. It is
not necessary to repeat the above procedure (1 through 3) of “To
display the Source mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the Source mode screen.”
The following steps 1 to 5 are common operations to each
“Setting item” of Source Setup. Refer to each section for details.