33
-EN
01GB05IVA100R.fm
ALPINE IVA-D100R 68-05946Z50-A (EN)
This function applies to Dolby Digital, DTS stream sound.
Setting item: DOWNMIX MODE
Setting contents: SURROUND / STEREO
Use the procedure described below to modify the output screen
according to the type of TV monitor (rear monitor) being used.
This setting can also be applied for the IVA-D100R/IVA-D100RB.
If the rear monitor is not connected, the screen setting is 16:9.
Setting item: TV SCREEN
Setting contents: 4:3 LB / 4:3 PS / 16:9
•
For some discs, the picture may not be set to the selected screen size.
(For details, refer to the explanation on the disc’s jacket.)
4:3 LETTER BOX:
Select this when connected to a conventional 4:3 size (normal
TV aspect ratio) monitor. There may be black stripes visible at
the top and bottom of the screen (when playing a 16 : 9 size
movie). The width of these stripes will depend upon the original
aspect ratio of the theatrical release of the movie.
4:3 PAN-SCAN:
Select this when connected to a conventional 4:3 size monitor.
The picture will fill the entire TV screen. However, due to the
mismatch in aspect ratio, parts of the movie at the extreme left
and right sides will not be visible (when playing a 16 : 9 size
movie).
16:9 WIDE:
Select this when connected to a wide screen TV. This is the
factory setting.
Some DVD-Audio discs include bonus group.
The 4 digit code for the bonus group can be memorized.
Refer to the information on the jacket, etc., of the disc, for the
code number.
Setting item: BONUS CODE
Setting contents: INPUT
1
Touch
[INPUT]
.
The 10 key input screen is displayed.
2
Input the 4 digit code number given on the jacket of
the disc, etc.
3
Touch
[ENT]
to memorize the number.
•
If the code number of the bonus group differs from the code number
you set in this section, the 10 key input screen automatically appears
in the display. If a new code number is input, this code number will
be replaced.
To playback the DVD Audio Disc, you have a choice of 3 different
settings. If the disc containing DVD Video and Audio, set VCAP (Video
Capable Audio Player) or VOFF (Video OFF) to playback the DVD
Audio.
Setting item: DVD-A SETUP
Setting contents: VIDEO / VCAP / VOFF
When playing a Playback Control (PBC) enabled video CD, you
can choose to set PBC ON or OFF.
Setting item: PBC
Setting contents: ON / OFF
Setting the Downmix Mode
SURROUND:
Surround compatible Downmix
STEREO:
Stereo Downmix
Setting the TV Screen Setting
Setting of the Bonus Code
Setting the DVD-Audio Playback Mode
VIDEO:
Only DVD Video is played back if the disc contains
DVD Video and Audio.
VCAP:
DVD Audio is played back with Video.
VOFF:
DVD Audio is played back without Video.
Setting the Video CD Play Mode
ON:
The PBC menu is displayed.
OFF:
The PBC menu is not displayed.
01GB00IVAD100R.book Page 33 Friday, February 10, 2006 2:39 PM
