28
-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
Presetting Stations Manually
1
Tune in a desired radio station you wish to store in
the preset memory by manual or automatic seek
tuning.
2
Touch and hold any one of the preset buttons for at
least 2 seconds.
The selected station is stored.
3
Repeat the procedure to store up to 5 other stations
onto the same band.
To use this procedure for other bands, simply select the
desired band and repeat the procedure.
A total of 18 stations can be stored in the preset memory
(6 stations for each band; FM1, FM2 or AM).
•
If a preset memory has already been set in the same preset number, it
will be cleared and the new station will be memorized.
Presetting Stations Automatically
The tuner can automatically seek and store 6 strong stations in the
selected band in order of signal strength.
After selecting the desired band, touch
[A.Memo]
of
Bottom banner.
The tuner automatically seeks and stores 6 strong stations into
the preset buttons in order of signal strength.
When automatic storing has completed, the station stored in the
preset 1 is selected.
If
[A.Memo]
is not displayed, touch
[<<]
or
[>>]
in the bottom
banner to display
[A.Memo]
.
•
If no stations are stored, the tuner will return to the original station
you were listening to before the automatic storing procedure began.
•
You can cancel this process by touching
[A.Memo]
while the tuner is
automatically seeking stations. Canceling will return the tuner preset
to the previous setting.
Tuning to Preset Stations
You can tune in the preset stations in memory on either band using its
preset number.
1
Touch
[Band]
of Bottom banner repeatedly until the
desired band is displayed.
2
Touch any one of the preset buttons that has a
station stored to it.
The preset station is received.
Forced Analog Mode
Press the Digital/Analog button to receive analog broadcasts only.
Touch
[Digital/Analog]
.
•
If digital broadcast is received, this operation switches reception to
analog mode.
•
During Forced Analog mode, only analog broadcasts will be received
even when digital broadcasts become available.
Receiving a Multicast (HD Radio mode
only)
Multicasting is the ability to broadcast multiple program streams over a
single FM frequency. This increases the amount and diversity of content
choices. A maximum of 8 multicast station channels can be selected on
this unit.
•
Indicator appears when signal reception is possible.
•
The station number of the current broadcast station appears on the
screen.
Selecting from the program list
1
Touch
[Multicast List]
.
A list of the types of programs currently being broadcast are
displayed.
2
Select and touch the desired SPS broadcast track.
Reception of signals from the selected SPS broadcast
station starts, and is indicated on the screen.
Changing the Multicast channels directly
Touch
[
Multicast]
or
[Multicast ]
The Multicast channel of the received radio station is changed.
•
If reception is lost during SPS broadcasting due to weak or no signal,
the screen will display “HDx Signal loss.”
If SPS broadcast reception is lost for over 100 seconds, reception will
switch over to MPS broadcast (the reception mode will automatically
return to SPS when SPS broadcasts become available again).
PTY (Program Type) Tuning (Analog
Broadcasts only)
FM Radio mode
1
Touch
[PTY Search]
of Bottom banner.
The Select PTY list screen is displayed.
If
[PTY Search]
is not displayed, touch
[<<]
in the bottom
banner to display
[PTY Search]
.
2
Touch the selected program type to start searching
for a station in the type.
If no PTY station is found, “NO PTY.” will be displayed.
3
Touch
[TUNE]
to choose the PTY tuning mode.
The PTY mode is activated.
4
To select the station in the PTY, touch
[
]
or
[
]
.
01GB00INE-W927HD.book Page 28 Thursday, October 4, 2012 5:03 PM
